Summer has come and gone, and the children are buried deep in their school books. The pool has been quiet these past few months; however, summer break is right around the corner, and it’s time to prepare the pool for some fun. But what is the average pool temperature in Florida during summer months?
This can be a touchy subject as there are numerous opinions based on what you like individually and how the weather is. Summer months in Florida can be unpredictable. Due to this, you will need to cool your swimming pool at least some of the time. This will assist in keeping it at the perfect temperature for you and your family.
So, What is the Best Pool Temperature in South Florida?
Typically, the perfect pool water temperature runs between 78-82 degrees in the spring and fall months. However, during spring months, it seems to drop to an ideal temperature to 76-78 degrees.
The average outdoor pool temperature will typically remain what the outdoor temperature is and can go as low as 53 degrees.
Now anything colder than 78 degrees will begin to make you feel chilled when you step out of the water. Anything above 82 degrees will start to feel like bathwater. Nevertheless, 80 degrees is generally warm and cold enough for all to enjoy.
Of course, you should keep in mind that each degree the temperature rises leads to increased energy costs of 10 to 30 percent. So, the correct temperature for your pool water is a function of how it feels on your skin and how it feels on your wallet.
Save Some Money: Maintain Pool Temperature Costs Down
Here are a few ideas that will assist maintain your pool warm while keeping your costs down:
Install trees, bushes, fencing, and the like to prevent wind from blowing through the pool zone.
If your pool heater is over five years old, consider investing in a new radiator. In some cases, these units quickly pay for themselves in lower utility bills.
If you intend to use your pool only on weekends, lower the temperature setting by 8 to 10 degrees during the week.
If you are going on break, turn off your pool heater. We don’t have to worry about freezing situations in Florida.
Install a timer that can automate and optimize the settings of your temperature. An automated pool heater will make this easy for you.
Run your pool’s filtration system between 8 pm and 10 am, when power demand and rates tend to be lower.
It may take a little time to find the correct balance of comfortable water temperature and cost-effective operation. That temperature will vary with the seasons. With a bit of energy, you can find your perfect temperature setting. Remember that it is always best to consult Florida Pool Heating with any questions to see what might be best for your particular pool.
Solar pool heaters can be expensive - anywhere from $1,000 to $5,000 - and then there’s the annual cost of fuel or electricity to run the heater. Without a heater, your pool season might be limited to 2-4 months, even in warmer seasons.
Many people base the choice of pool heaters on many factors, such as local climate, temperature preference, and budget.
However it’s vital to note that, in most areas, your pool temperature may only reach 75 degrees in the warmest months. According to the U.S. Department of Energy, pool temperatures usually range from 78 to 82 degrees, and kids and the elderly may need a temperature of at least 80 degrees.
Common Types of Pool Heaters
There are three forms of pool heaters: gas, heat pump (electric) and solar.
Gas-fired Pool Heaters heat a pool quickly, but they’re expensive to operate because of fuel costs. Gas Heaters are best for pools that are not used regularly. Generally, they’re turned on when the pool is going to be used and turned off afterward.
Heat pumps depend on electricity to heat the pool. They’re more expensive upfront as compared to gas heaters but much cheaper to operate. These models are not very efficient if the air temperature dips below 50 degrees, but that’s not usually an issue since pools are most often used in warmer weather.
Heaters come in different sizes and efficiencies, so check with your pool contractor or a local expert to find out which models will work for you. The greater the size and efficiency, the more expensive the pool heater will be.
Pool Heater Annual Operating Costs
Annual operating costs are based on the type of heater, local energy rates, the size of the pool, the temperature you maintain, local climate, the length of the swimming season, and more. This energy department guide provides estimates of what you can expect to pay for gas heat in South Florida. Yearly costs range from $100 to $3,600.
Contrary to what you might think, it’s not always cheaper to heat a pool in warmer climates since the swimming season is much longer than colder climates.
We have no doubt saying that a pool heater bought from one of the major manufacturers and correctly installed and maintained is 100% safe.
Of course, like any heating appliance, they can be unsafe if mismanaged. Gas pool heaters produce carbon monoxide, so if installed indoors, they must be correctly vented, and when installed outdoors, proper thought must be given to the positioning (under house windows is not a good site). Adequate ventilation is crucial, so it is essential to ensure that debris does not build-up around an outdoor pool heater. They must also be kept clean inside, so a qualified gas engineer's yearly service is strongly advised.
Current gas pool heaters feature a variety of safety features such as ignition safeguards, pressure regulators, water pressure relief valves, and automatically shut off controls, all of which means that in use, they are very safe.
Electric pool heat pumps offer little in the way of danger other than electrical devices and must be respected as such, but essentially electric shock hazard is avoided by construction and installation of the heater in line with strict electrical standards and codes.
Solar pool heater systems are also safe if adequately designed and installed. It is quite practical to buy a system and install it yourself without creating any issues.
To ensure ongoing safe operation, all pool heaters should be drained over winter to avoid any frost damage.
Many individuals consider making their DIY pool heaters, usually solar systems, and it is here that safety can be a question mark. All forms of safety issues can arise, such as pumping very hot water into the pool when first turned on.
A home pool is a fantastic luxury to have in Miami: a crystal-clear swimming pool reflecting a clear blue sky is an ideal that people have about what life in our city is all about. There's no reason why you shouldn't get year-round satisfaction from your pool and make it more than a spring and summer way to relax. That sky doesn't have to be bright blue for you to take a pleasurable dip as long as you have the right pool heater installed.
Florida Pool Heating doesn't only handle air conditioners and home heaters—we also handle keeping your pool heated and inviting even when it doesn't have the Florida sun shining down upon it. We offer installation on many pool heaters to fit all pool sizes and budget requirements. Contact us for best pool heaters in Miami, to keep you happy all year.
What Happens with Pool Heater Installation?
First, the installers need to understand how to best heat your pool. It requires a professional to figure out what heater will fit best with yours and supply the proper heating capacity to provide a comfortable temperature. The other factor the installers will consider is the price of electricity in your area.
The actual installation process does not take long, and it doesn't need anything as drastic as draining your pool. Though, the installers will need to clean your pool of debris and check the pH level of the water to make sure it is balanced before they start.
The installers will then connect the pool heater using PVC pipes from the pool filter return valve to the heater's intake valve, which will run the filtered water into the heater. Another PVC pipe will run from the heater's outlet valve toward your pool's return valve: this carries the heated water into the pool. The installers will ensure all the connections are secure and that the heater is receiving power from its source (this will usually be electric). The installers won't leave your pool until they are certain the heater is working properly without any leaks.
Call experts to handle your poor installation and maintenance in Miami
Due to the factors involved in selecting the proper pool heater and making sure it is set up correctly, you should only rely on pool heating professionals to perform this job. After you've had your installation, ensure your heater continues making your pool a pleasurable home oasis with regular maintenance. Contact Florida Pool Heating today for all your pool heater installation and repair needs in Miami.
Approximately one million residential and 200,000 commercial solar water-heating systems have been installed in America. Although there are many different types of solar water heaters available on the market, the basic technology is very simple.
Sunlight strikes and heats an "absorber" surface within a "solar collector" or an actual storage container. These roof-mounted solar heaters supply around 80% of the hot water for the home. Either a heat-transfer fluid or the real potable water to be used flows through tubes attached to the absorber and picks up the heat from it. (Systems with a separate heat-transfer-fluid loop comprise a heat exchanger that then heats the potable water.) The heated water is stored in a separate preheat tank or a conventional water heater tank until required.
By lowering the amount of heat that must be provided by conventional water heating, solar water-heating systems directly substitute renewable energy for traditional energy, reducing the use of electricity or fossil fuels by as much as 80%.
The current types of solar pool water-heating systems available on the market are proven reliable when correctly matched to climate and load. The present market consists of a relatively small number of manufacturers and installers that provide dependable equipment and quality system design.
Quality assurance and performance-rating program for solar water-heating systems, instituted by a voluntary association of the solar industry and various customer groups, makes it easier to select reliable equipment with confidence.
Homeowners should investigate the intricate details of installing solar hot water heating systems to reduce energy use. However, before sizing a solar system, water-use reduction strategies should be practiced.
Different Types of Solar Hot Water Heaters
There are five types of solar thermal water heaters:
Thermosiphon Systems. These systems warm water or an antifreeze fluid, such as glycol. The fluid rises by natural convection from collectors to the storage container, which is placed at a higher level. No pumps are needed. In thermosiphon systems, fluid movement, and hence heat transfer, increases with temperature, so these systems are most efficient in areas with high levels of solar radiation.
Direct-Circulation Systems.These systems pump water from storage to collectors during sunny seasons. Freeze protection is attained by recirculating hot water from the storage tank, or by flushing the collectors (drain-down). Since the recirculation system raises the use of energy, while flushing reduces the hours of operation, direct-circulation systems are used only in areas where freezing temperatures are infrequent.
Drain-Down Systems.These systems are usually indirect water-heating systems. Treated or untreated water is circulated through a closed-loop, and heat is moved to potable water through a heat exchanger. When no solar heat is available, the collector fluid is drained by gravity to avoid freezing and convection loops in which cool collector water lowers the temperature of the stored water.
Indirect Water-Heating Systems.In these systems, freeze-protected fluid is circulated through a closed-loop, and its heat is transferred to potable water through a heat exchanger with 80 to 90 percent efficacy. The most generally used fluids for freeze protection are water-ethylene glycol solutions and water-propylene glycol solutions.
Air Systems. In the air system, the collectors heat the air, which is moved by a fan through an air-to-water heat exchanger. The water is then used for domestic or service requirements. The efficacy of the heat exchanger is in the 50% range.
Direct-circulation, thermosiphon, or pump-activated systems need higher maintenance in freezing climates. For most in the United States, indirect air and water systems are the most suitable. While not as efficient as water systems, solar air systems should be considered if maintenance is a significant concern since they do not leak or burst.
Solar Water Heater Miami – Frequently Asked Questions
Solar pool water heating is a technology that each homeowner can use to save dollars on utility bills. Questions most frequently addressed to the Florida Solar Energy Center (FSEC) concerning solar water heating are answered below. Please note that many replies are general and more explanation may be required for those with particular questions.
What is a Solar Water Heater?
A solar pool heater uses the sun's energy instead of electricity or gas to heat water, reducing your monthly utility bill. When installed correctly, solar water heaters for Miami are more economical over the life of the system as compared to heating water with electricity, dedicated heat pumps, heat recovery units, or propane.
In Miami, three types of solar systems are used: pumped, integral collector storage (ICS), and thermo-siphon. The direct circulation system circulates potable water from the water storage tank throughout one or more collectors and back into the tank. The solar collector is a significant component of the solar system. It is usually a metal box with insulation and a black absorber plate that amasses solar radiation and heats the water. The circulating pump is controlled by either an electronic controller, a common appliance timer, or a photovoltaic (PV) panel.
In integral collector storage systems, the solar water storage system is built into the collector. The potable water in the collector unit is heated by the sun and delivered by municipal or well water pressure to an auxiliary tank (which contains non-solar backup heating) or directly to the point of usage.
A thermosiphon solar water heating system has a tank mounted above the collector (usually on the roof) to provide natural gravity flow of water. Hot water rises through piping in the collector, which is mounted below the tank; heftier cold-water sinks to the lowest point in the system (the collector), displacing the lighter hot water, which rises to the tank.
The ICS and thermosiphon systems are simple because they use no pumps or controllers, and water always flows through the collector.
Do I Have to Change My Habits to Use a Solar Water Heater Miami?
No. Solar water heaters are typically installed with a backup heating system in the storage tank to ensure that hot water is available at all times. Nevertheless, to maximize solar utilization and your savings, you should attempt to use the warmest water in the late morning and early afternoon when the solar system is operating at its peak due to the available sunshine. Your solar system will be more effective if your use of hot water is spread more evenly over the week. For instance, if you use hot water for laundry, instead of washing sevral loads of clothes every day, wash one load each day. This will reduce the amount of backup energy needed for your solar system.
How Much Does a Solar Water Heater Miami Cost?
In Miami, an installed solar water heating system can cost anywhere from $3,500 to $5,500. Why the vast range? System cost depends upon particular variables, such as the following:
Size of the household to be served
Size and kind of solar system
Type of financing existing
Kind of roof on which the collector is to be installed
Amount of possible utility reimbursement incentive
Building code needs
Expert versus do-it-yourself installation.
Solar water heater Miami is economically competitive with electrical and propane heaters. It is also competing with dedicated pool heat pumps and heat recovery units, based on the individual situation.
How Do I Finance a Solar Water Heating System?
The best way to finance a solar energy system is to include it as part of your household mortgage. In long-term loans of 20 years or more, the monthly solar savings are generally greater than the monthly mortgage payments for the solar system.
If you are purchasing an existing home with a new mortgage, you may be able to include a new solar water heater in the mortgage. Check with your resident lending office. Many Florida lending institutions offer short-term loans for solar systems, depending on the applicant's personal credit rating. Some solar corporations also provide system financing.
Purchasing a solar water heater makes sense right away; you pay more upfront but can cut your water heating bills by 50-80%.
But are those energy savings sufficient? Do they justify the high upfront cost of solar water heater Florida? Let’s do the calculation.
Doing the Calculation on Solar Water Heating
First and foremost, let’s begin with the cost of a solar water heater. With installation, a solar pool heater costs between $3,935 (< 80-gallon tank) to $9,654 (> 120-gallon tank). The average cost is $6,766 (80-gallon tank).
To put things in proper perspective, an 80-gallon tank heats enough water for a family of 5, according to FPL.
Please keep in mind that cost depends on numerous other factors. We suggest you get an estimate for a water heater that fits your family’s requirements.
After you get a solar water heater cost estimate, start subtracting incentives from it.
1.Deduct Federal tax credits from cost
Assuming you get an ENERGY STAR qualified solar water heater, your highest price cut will be from the 30% federal tax credit.
2.Deduct local energy company rebates from cost
Rebates vary for every energy company
Solar Water Heaters: How Much Will I Save Each Year?
Since Florida is so sunny throughout the year, the solar water heater hardly depends on its backup heating tank. So, it’s effective at saving you money.
According to Florida Solar Energy Center, a household of 4 using a solar water heater with a backup element could save $200-$300 a year in lower water heating costs.
A solar water heater lasts for about 20 years. So, the household of four could save $4,000 to $6,000 over the solar water heater’s lifetime.
So, let’s do the calculation:
$7000 to purchase install solar water heater (average cost, rounded up)
-$2100 (30% federal tax credit)
-$1000 (FPL rebate)
-$4000 (low end of energy savings)
That means the solar water heater Florida pays for itself over its lifetime (and saves you another $100).
Maintaining a comfortable temperature can make a world of difference when it comes to the usability of your pool heater. You can get by with an unheated pool during the day when the weather is hot enough; however, it can make it hard to use your pool regularly. In the evening, when the weather cools, you will often be forced to stay out of the water because of the falling temperature.
Additionally, you’ll have to wait longer in the year to start swimming, and close up shop much earlier in the Fall as well.
Fortunately, with the addition of a quality pool heating system, you’ll have additional usable days of swimming available and more evenings as well.
Florida Pool Heating is here to help, whether you require a system to be installed for the first time or you simply require a repair or regular maintenance on your existing unit. To help you learn what advantages our company can provide for your home or business, let’s cover our service in more detail below.
Unlike some competitors, Florida Pool Heating will respond to your service call in a timely and efficient manner. We pride ourselves with a superior customer service, and that means providing fast response times for each customer. We have many qualified technicians available to respond to your request, which will be radio dispatched straight to your door. Why wait days or even weeks for an appointment, when Florida Pool Heating will service or install your pool heating system right away?
Experienced Staff for Any Pool Heater Repair Work
Our workforce is competent and well-versed on the latest models, and we service both Pentair and Hayward pool heating units. Pentair is known as a global leader in the pool industry, with millions of customers worldwide. Their products enhance performance and quality design, and they are dedicated to providing energy-efficient and reliable heating systems. Hayward is also a trusted name in pool heating, being in business for over eight decades. The heating units of Hayward are built to last, and they have a low-maintenance design. Florida Pool Heating works mostly with both of these brands because they are superior selections, ensuring that your pool heater performs at its best. Be assured that our trained technicians have the experience to carry out installation, repair, or maintenance on these quality brands.
Residential or Commercial Pool Heating Service
Pool heaters Miami supports a variety of different clients, no matter if you are a homeowner or a commercial customer. Irrespective of the size of your pool, we can handle the job, as we have the staff and equipment to do the job right the first time. We service community pools, large commercial pools for apartment buildings or condominiums, and standard residential swimming pools.
We are professionals at installing and maintaining energy-efficient pool heating systems, which can add up to a great deal of savings. As pool heaters frequently run for long periods, having an efficient unit can significantly reduce your utility costs. We will work with you to provide the correct solution for your particular situation, which will save you a lot of money overall. Also, we provide a lot of exclusive deals and promotions to make your installation or repair more affordable.
Add Enjoyment With Pool Heater Miami
Lastly, a pool heating system will allow you to use your pool for more days of the year and in the evenings, but it can make your swimming experience more enjoyable. The warm water makes getting into your pool inviting, removing the shock that jumping into cold water can bring. You’ll likely find yourself spending a lot of time in the pool each time that you and your family swim, as you are comfortable with the warmer temperature. Additionally, you’ll be able to adjust the settings to your individual liking, so your pool will always stay at the temperature which most suits your tastes.
All that said, Florida Pool Heating is an excellent option, as we can provide many benefits and make swimming in your pool even more enjoyable. We are here to assist with your requirements in any way, whether you decide to purchase a new system or have an existing one repaired. We provide fast service, professional staff experienced on the best brands in the industry, and service both residential and commercial customers. Moreover, we are adept at installing energy-efficient systems, which are designed to save you money. Finally, with the numerous deals and promotions that we regularly offer, you will lower your initial cost to own a new pool heating system. For all of these reasons, Florida Pool Heating is the obvious choice for keeping your pool warm and inviting.
There are various advantages of having a pool. From daily exercise to cooling off during the summer, your pool provides recreational choices and a place to enjoy time with friends and family. But during those crisp mornings and colder winter months, your pool lies unused. A simple pool heater installation can help you get the most out of your pool so you can enjoy swimming year-round.
At Florida Pool Heating, we assist businesses and homeowners alike in Fort Lauderdale, obtain affordable and quality pool heaters. With a reputation for family pride, we treat you as if you're a part of our family by offering you unmatched customer service and quality products that fit your lifestyle and budget. At Florida Pool Heating, it's our privilege to serve the community we call home.
Benefits of Pool Heaters in Florida Fort Lauderdale
When it comes to buying pool heaters, you require a heater that not only delivers powerful and quiet performance but is also resistant to rust and corrosion. At Florida Pool Heating, we offer a vast choice of pool heaters that fit your budget and provide superior performance. But you may be wondering what all do pool heaters in Fort Lauderdale, Florida offer? The advantages of a pool heater install are many, including:
1. Extended Pool Season
With a pool heater, your swimming days are not limited. By adjusting to ideal temperatures, pool heaters enable you to enjoy your pool each day.
2. Maximizes Your Investment
Opting to invest in a pool can be a big decision for homeowners in Fort Lauderdale. Once your mind is made up, having a pool heater installed can maximize your investment and offer you the advantage of having a pool all seasons of the year.
With very little maintenance, pool heaters can maintain the temperature of your pool comfortable year-round with minimal upkeep.
4. Increased Value
A pool in your Fort Lauderdale home can increase the worth of your home by up to 7%. Having a pool with a built-in pool heater can capitalize on your pool's value and improve your home's overall cost.
Pool Heater Installations
Opting to have a pool heater installed can be a costly investment. But your pool heater fitting doesn't have to be a problem. At Florida Pool Heating, we provide pool heater installations to residents and business owners in Fort Lauderdale and Broward County that are hassle-free and budget-friendly. With your requirements in mind first, we offer specialized and efficient pool heater installs at high rates.
With experience in serving Fort Lauderdale and surrounding areas, our reputation precedes us as one of the formidable companies in the surrounding. Our dedication to customer satisfaction and quality services is matchless. At Florida Pool Heating, you can easily know that your pool heater installation will be completed properly the first time around.
For clients of Pool Service and Pool Troopers there is still one month to take advantage of our Spring Special Filter maintenance and equipment check. This annual preventative maintenance on your pool’s equipment is designed to get your pool and its equipment ready for the swim season which is upon us now. DE filters need to be disassembled and cleaned, and cartridges need to be checked and replaced if needed. Seals and O-rings need to be checked, lubricated and replaced, and a safety inspection of the pool pump and filter, the timer and wiring, as well as the drain covers in the pool needs to be done. All of this is included in this service.
your pool’s equipment is designed to get your pool and its equipment ready for the swim season which is upon us now. DE filters need to be disassembled and cleaned, and cartridges need to be checked and replaced if needed. Seals and O-rings need to be checked, lubricated and replaced, and a safety inspection of the pool pump and filter, the timer and wiring, as well as the drain covers in the pool needs to be done. All of this is included in this service.