Monday-Friday | 8am-4pm
1969 NW 55th Ave, Margate FL 33063
Hayward
Hayward HeatPro Heat Pumps
Three models that heat and three Heat+Chill models that also cool the pool.
Florida Pool Heating is a family owned company in Margate, serving pools across Broward, Palm Beach and Miami-Dade since 1988.
- Microchannel coil with 85% fewer braze joints, by Hayward’s count
- Heat+Chill models can chill water down to 40°F
- 230V single phase, on a 40 or 50 amp breaker
Get a HeatPro quote
Tell us about your pool, your current heater and your electrical panel, and we will help you choose the right model.
(954) 341-2002
Monday through Friday, 8 am to 4 pm
What is different about HeatPro
Most pool heat pumps use a tube and fin coil. HeatPro uses a microchannel coil, which Hayward lists with
- 85% fewer braze joints, so fewer places for a leak to start
- up to 50 pounds less weight
- less refrigerant
- a corrosion resistant coil coating
HeatPro units are built in Nashville, Tennessee, and are AHRI certified.
Request an estimate
Heat only or Heat+Chill
The HP21105T, HP21205T and HP21405T heat the pool to stretch the swim season through winter.
The HP31105T, HP31205T and HP31405T also cool it in summer, with 72,000 to 82,000 BTU of cooling.
All six use a single-speed compressor. For a heat pump that slows down to hold temperature, compare the AquaCal TropiCal.
Electrical, pad and control
The 110,000 and 120,000 BTU models use a 40 amp breaker and the largest model in each line a 50 amp breaker. All six share one cabinet, 33.6 x 30.5 x 44 inches, with a flow range of 30 to 75 gallons per minute.
Paired with Hayward’s Omni automation you can set the temperature from your phone. See pool and spa automation.
Ratings in the table read air, water and humidity, so 50/80/63 means 50°F air, 80°F water and 63% humidity.
Ask about a HeatProHeatPro models and specifications
| Model | Type | Heating BTU 80/80/80 | Heating BTU 50/80/63 | Cooling BTU 95/90/80 | Breaker |
|---|---|---|---|---|---|
HP21105T |
Heat only |
110,000 |
75,000 |
None |
40 amp |
HP21205T |
Heat only |
120,000 |
75,000 |
None |
40 amp |
HP21405T |
Heat only |
138,000 |
82,000 |
None |
50 amp |
HP31105T |
Heat+Chill |
110,000 |
75,000 |
72,000 |
40 amp |
HP31205T |
Heat+Chill |
120,000 |
75,000 |
72,000 |
40 amp |
HP31405T |
Heat+Chill |
135,000 |
82,000 |
82,000 |
50 amp |
Is the Hayward HeatPro an inverter heat pump?
No. All six HeatPro models use a single-speed compressor. For an inverter, compare the AquaCal TropiCal.
Can a HeatPro cool my pool?
The three Heat+Chill models can, and Hayward says they can chill water down to 40°F. The heat only models do not cool.
What size breaker does a HeatPro need?
A 40 amp breaker for the 110,000 and 120,000 BTU models and a 50 amp breaker for the HP21405T and HP31405T.
Already own a Hayward heater?
See Hayward pool heater repair and replacement or call our service and repair team.
Get a HeatPro quote
Tell us about your pool, your current heater and your electrical panel, and we will help you choose the right model.
(954) 341-2002
Florida Pool Heating, Margate, FL. Monday through Friday, 8 am to 4 pm.